How To Reuse Your Old Spark Plug

As you know if there is a trouble starting you motorbike suddenly or unexpectedly the obvious reason is the spark plug. But in most cases it is not the spark plug itself, it is because of the incorrect tuning of the engine causing oil spill into the plug socket. So instead of replacing the spark plug, you can simply clean it with the following procedure.

1. Remove the spark plug from its socket. If you don't know how to remove a spark plug click here to find out.

2. Once removed you will see that its fixed corner is blacked and oily, which prevents spark.

3. First clean it with a cloth, the get a sand-paper and fold it so that both sides are rough and place it between the electrode and the metal shell and rub it well for a few seconds.

4. Dip the ground electrode and a few threads in a small amount of petrol and light it up with fire and leave it until the light dies.

5. Clean it with a cloth again and replace the spark plug and you are good to go.


Warning:

When you light up the spark plug after dipping in petrol, make sure you do it away from the motorbike and other flamable sources.

Place the spark plug on the floor before you light it up, or you may hurt yourself.


I DO NOT RECOMMEND THIS TO BE DONE BY CHILDREN, IF YOU DO IT BE VERY CAREFUL. READ THE INSTRUCTIONS STATED ABOVE WELL.